KR1002 — Konnra se ekwivalent van Hirose DF19

Konnra publiseer KR1002 as sy ekwivalent van Hirose DF19.

Wat Konnra publiseer

Konnra se eie woorde

KR1002 Equivalent To HIROSE DF19 alternatives connector

KR1002 series connectors are KONNRA’s equivalent to the HIROSE DF19 – a 1.00mm pitch, single-row, low-profile wire-to-board connector built for LVDS display links and other high-speed differential signals.

HIROSE describes the DF19 as the de facto standard for LCD panel connections on panels under 12 inches, and this series is designed to that interface.

Built for LVDS display links and other high-speed differential signalling – the interface HIROSE developed the DF19 around.

Rated 1A with an AWG #28 conductor – the same figure HIROSE publishes for the DF19 at that gauge.

The rating follows your conductor: HIROSE publishes 0.9A at AWG #30, 0.8A at #32, 0.5A at #36 and 0.5A for FPC terminations, so confirm the applicable figure for your actual wire.

Bron: konnra.com

Steek 1.00mm

Versoek KR1002-monsters KR1002-produkbladsy

KR1002-spesifikasie soos deur Konnra gepubliseer

KR1002 ekwivalent aan HIROSE DF19, alternatiewe konnektor
Steek	1.00mm
Kringe	8-30 pin (DF19 standard counts: 8, 14, 20, 30)
Stroom	1A
Spanning	100V

Algemene spesifikasie
Materiaal	PA66/UL94/PA6T/Phosphor Bronze
Isolasie-buitedeursnee (O.D)	0.8mm Max
Weerstaanspanning	500V AC/ minute
Temperatuurreeks	-40℃～+105℃
Kontakweerstand	30mΩ Max
Isolasieweerstand	500MΩ Min
Produkbeplating	Gold flash/Tin over Nickel

KR1002: gereelde vrae

Publiseer Konnra KR1002 as ekwivalent van Hirose DF19?

Ja. Konnra publiseer dit: "KR1002 Equivalent To HIROSE DF19 alternatives connector".

Watter steek druk Konnra vir KR1002?

Konnra druk 1.00mm vir KR1002.

Hoe kry ek KR1002-monsters?

Gebruik die "Versoek KR1002-monsters"-knoppie op hierdie bladsy, of stuur e-pos aan sales003@konnra.com.