KR1002 — Konnra's equivalent to Hirose DF19

Konnra publishes KR1002 as its equivalent to Hirose DF19.

What Konnra publishes

Konnra's own words

KR1002 Equivalent To HIROSE DF19 alternatives connector

KR1002 series connectors are KONNRA’s equivalent to the HIROSE DF19 – a 1.00mm pitch, single-row, low-profile wire-to-board connector built for LVDS display links and other high-speed differential signals.

HIROSE describes the DF19 as the de facto standard for LCD panel connections on panels under 12 inches, and this series is designed to that interface.

Built for LVDS display links and other high-speed differential signalling – the interface HIROSE developed the DF19 around.

Rated 1A with an AWG #28 conductor – the same figure HIROSE publishes for the DF19 at that gauge.

The rating follows your conductor: HIROSE publishes 0.9A at AWG #30, 0.8A at #32, 0.5A at #36 and 0.5A for FPC terminations, so confirm the applicable figure for your actual wire.

Source: konnra.com

Pitch 1.00mm

Request KR1002 samples KR1002 product page

KR1002 specification as published by Konnra

KR1002 Equivalent To HIROSE DF19 alternatives connector
Pitch	1.00mm
Circuits	8-30 pin (DF19 standard counts: 8, 14, 20, 30)
Current	1A
Voltage	100V

General Specification
Material	PA66/UL94/PA6T/Phosphor Bronze
Insulation O.D	0.8mm Max
Withstanding Voltage	500V AC/ minute
Temperature Range	-40℃～+105℃
Contact Resistance	30mΩ Max
Insulation Resistance	500MΩ Min
Product Plating	Gold flash/Tin over Nickel

KR1002 FAQ

Does Konnra publish KR1002 as equivalent to Hirose DF19?

Yes. Konnra publishes it: "KR1002 Equivalent To HIROSE DF19 alternatives connector".

What pitch does Konnra print for KR1002?

Konnra prints 1.00mm for KR1002.

How do I get KR1002 samples?

Use the "Request KR1002 samples" button on this page, or email sales003@konnra.com.