KR1002 — katumbas ng Konnra sa Hirose DF19

Inilalathala ng Konnra ang KR1002 bilang katumbas nito sa Hirose DF19.

Ang inilalathala ng Konnra

Mismong pananalita ng Konnra

KR1002 Equivalent To HIROSE DF19 alternatives connector

KR1002 series connectors are KONNRA’s equivalent to the HIROSE DF19 – a 1.00mm pitch, single-row, low-profile wire-to-board connector built for LVDS display links and other high-speed differential signals.

HIROSE describes the DF19 as the de facto standard for LCD panel connections on panels under 12 inches, and this series is designed to that interface.

Built for LVDS display links and other high-speed differential signalling – the interface HIROSE developed the DF19 around.

Rated 1A with an AWG #28 conductor – the same figure HIROSE publishes for the DF19 at that gauge.

The rating follows your conductor: HIROSE publishes 0.9A at AWG #30, 0.8A at #32, 0.5A at #36 and 0.5A for FPC terminations, so confirm the applicable figure for your actual wire.

Pinagmulan: konnra.com

Pitch 1.00mm

Humingi ng mga sample ng KR1002 Product page ng KR1002

Specification ng KR1002 ayon sa inilathala ng Konnra

KR1002 Katumbas ng HIROSE DF19 na alternatibong connector
Pitch	1.00mm
Mga circuit	8-30 pin (DF19 standard counts: 8, 14, 20, 30)
Kuryente	1A
Boltahe	100V

Pangkalahatang specification
Materyal	PA66/UL94/PA6T/Phosphor Bronze
Insulation O.D	0.8mm Max
Withstanding voltage	500V AC/ minute
Saklaw ng temperatura	-40℃～+105℃
Resistensya ng contact	30mΩ Max
Resistensya ng insulation	500MΩ Min
Plating ng produkto	Gold flash/Tin over Nickel

Mga Madalas Itanong sa KR1002

Inilalathala ba ng Konnra ang KR1002 bilang katumbas ng Hirose DF19?

Oo. Inilalathala ito ng Konnra: "KR1002 Equivalent To HIROSE DF19 alternatives connector".

Anong pitch ang ini-print ng Konnra para sa KR1002?

Ini-print ng Konnra ang 1.00mm para sa KR1002.

Paano ako makakakuha ng mga sample ng KR1002?

Gamitin ang button na "Humingi ng mga sample ng KR1002" sa pahinang ito, o mag-email sa sales003@konnra.com.