KR1002 — padanan Konnra untuk Hirose DF19

Konnra mempublikasikan KR1002 sebagai padanannya untuk Hirose DF19.

Yang dipublikasikan Konnra

Redaksi Konnra sendiri

KR1002 Equivalent To HIROSE DF19 alternatives connector

KR1002 series connectors are KONNRA’s equivalent to the HIROSE DF19 – a 1.00mm pitch, single-row, low-profile wire-to-board connector built for LVDS display links and other high-speed differential signals.

HIROSE describes the DF19 as the de facto standard for LCD panel connections on panels under 12 inches, and this series is designed to that interface.

Built for LVDS display links and other high-speed differential signalling – the interface HIROSE developed the DF19 around.

Rated 1A with an AWG #28 conductor – the same figure HIROSE publishes for the DF19 at that gauge.

The rating follows your conductor: HIROSE publishes 0.9A at AWG #30, 0.8A at #32, 0.5A at #36 and 0.5A for FPC terminations, so confirm the applicable figure for your actual wire.

Sumber: konnra.com

Pitch 1.00mm

Minta sampel KR1002 Halaman produk KR1002

Spesifikasi KR1002 sebagaimana dipublikasikan Konnra

KR1002 Setara dengan HIROSE DF19 Konektor Alternatif
Pitch	1.00mm
Sirkuit	8-30 pin (DF19 standard counts: 8, 14, 20, 30)
Arus	1A
Tegangan	100V

Spesifikasi umum
Bahan	PA66/UL94/PA6T/Phosphor Bronze
Diameter luar isolasi	0.8mm Max
Tegangan tahan	500V AC/ minute
Rentang suhu	-40℃～+105℃
Resistansi kontak	30mΩ Max
Resistansi isolasi	500MΩ Min
Pelapisan produk	Gold flash/Tin over Nickel

FAQ KR1002

Apakah Konnra mempublikasikan KR1002 sebagai padanan Hirose DF19?

Ya. Konnra mempublikasikannya: "KR1002 Equivalent To HIROSE DF19 alternatives connector".

Pitch berapa yang dicetak Konnra untuk KR1002?

Konnra mencetak 1.00mm untuk KR1002.

Bagaimana cara mendapatkan sampel KR1002?

Gunakan tombol "Minta sampel KR1002" di halaman ini, atau kirim email ke sales003@konnra.com.