KR1002 — l'equivalente di Konnra a Hirose DF19

Konnra pubblica KR1002 come proprio equivalente a Hirose DF19.

Cosa pubblica Konnra

Le parole di Konnra

KR1002 Equivalent To HIROSE DF19 alternatives connector

KR1002 series connectors are KONNRA’s equivalent to the HIROSE DF19 – a 1.00mm pitch, single-row, low-profile wire-to-board connector built for LVDS display links and other high-speed differential signals.

HIROSE describes the DF19 as the de facto standard for LCD panel connections on panels under 12 inches, and this series is designed to that interface.

Built for LVDS display links and other high-speed differential signalling – the interface HIROSE developed the DF19 around.

Rated 1A with an AWG #28 conductor – the same figure HIROSE publishes for the DF19 at that gauge.

The rating follows your conductor: HIROSE publishes 0.9A at AWG #30, 0.8A at #32, 0.5A at #36 and 0.5A for FPC terminations, so confirm the applicable figure for your actual wire.

Fonte: konnra.com

Passo 1.00mm

Richiesta campioni KR1002 Pagina prodotto KR1002

Specifiche KR1002 come pubblicate da Konnra

KR1002 equivalente a HIROSE DF19 (connettore alternativo)
Passo	1.00mm
Circuiti	8-30 pin (DF19 standard counts: 8, 14, 20, 30)
Corrente	1A
Tensione	100V

Specifiche generali
Materiale	PA66/UL94/PA6T/Phosphor Bronze
Diametro esterno dell'isolamento	0.8mm Max
Tensione di tenuta	500V AC/ minute
Intervallo di temperatura	-40℃～+105℃
Resistenza di contatto	30mΩ Max
Resistenza di isolamento	500MΩ Min
Placcatura del prodotto	Gold flash/Tin over Nickel

Domande frequenti su KR1002

Konnra pubblica KR1002 come equivalente di Hirose DF19?

Sì. Konnra lo pubblica: "KR1002 Equivalent To HIROSE DF19 alternatives connector".

Quale passo riporta Konnra per KR1002?

Konnra riporta 1.00mm per KR1002.

Come si ottengono i campioni KR1002?

Usi il pulsante «Richiesta campioni KR1002» in questa pagina oppure scriva a sales003@konnra.com.